Verilink 2100 (34-00187) Product Manual - Manual (Page 7)

General 1-3 2100 CSU
FIC (Facility Interface Code):
04DU9-BN
04DU9-DN
04DU9-IZN
04DU9-IKN
04DU9-ISN
USOC jack: RJ-48C
RJ-48H
3. If the unit appears to be malfunctioning, it should be dis-
connected from the telephone lines until you learn
whether the source of trouble is your equipment or the
telephone line. If your equipment needs repair, it should
not be reconnected until it is repaired.
4. The unit has been designed to prevent harm to the T1
network. If the telephone company finds that the equip-
ment is exceeding tolerable parameters, they can
temporarily disconnect service. In this case, the tele-
phone company will give you advance notice, if possible.
5. Under FCC rules, no customer is authorized to repair this
equipment. This restriction applies regardless of whether
the equipment is in or out of warranty.
6. If the telephone company alters their equipment in a
manner that will affect the use of this device, they must
give you advance warning so that you can have the
opportunity for uninterrupted service. You will be
advised of your right to file a complaint with the FCC.
7. The attached affidavit must be completed by the installer.
8. In the event of equipment malfunction, all repairs should
be performed by our company or an authorized agent. It
is the responsibility of users requiring service to report
the need for service to our company or to one of our
authorized agents.
Canadian Emissions
Requirements
This digital apparatus does not exceed the Class A limits for
radio noise emissions from digital apparatus set out in the
Radio Interference Regulations of the Canadian Department
of Communications.
End users should use existing 48-VDC battery
sources or a CSA certified power supply.
Le présent appareil numérique n’émet pas de bruits
radioélectriques dépassant les limites applicables aux appar-
eils numériques (de la class A) prescrites dans le Règlement
sur le brouillage radioélectrique édicté par le ministère des
Communications du Canada.
Warranty
TxPORT warrants each unit against defects in material and
workmanship for a period of five years from the date the
unit was shipped to the customer. If the unit malfunctions at
any time during the warranty period, TxPORT will repair, or
at TxPORT’s option, replace the unit free of charge.
The remedies listed herein are the user’s sole and exclusive
remedies. TxPORT shall not be liable for any indirect, di-
rect, incidental or consequential damages. The owner must
return the unit to the factory, shipping prepaid and packaged
to the best commercial standard for electronic equipment.
TxPORT will pay shipping charges for delivery on return.
The customer is responsible for mode and cost of shipment
to TxPORT. This warranty does not apply if the unit has
been damaged by accident, misuse or as a result of service
or modification by other than TxPORT personnel.
When returning the unit for warranty work, a Return Materi-
al Authorization (RMA) number must be obtained from cus-
tomer service at the address /phone number given below.
When calling TxPORT to obtain a Return Material Authori-
zation number or to arrange service, please have the follow-
ing information available:
• Model number(s) and serial number(s) for the unit(s).
• Reason for return and symptoms of problem.
• Warranty status (if known).
• Purchase order number to cover charges for out-of-warranty
items.
• Name and phone number of person we can contact if we
have questions about the unit(s).
• Mode of shipment required (second day air is the normal
mode of shipment for all returned material unless otherwise
specified).
As soon as TxPORT has the above information, the RMA
that must accompany the item(s) returned can be issued.
Ordering Numbers
The part numbers for the stand-alone unit and the modular
chassis unit are shown in Table 1-A on page 1-4 :
The unit is shipped from the factory with the 2100 CSU
reference manual. Refer to Table 2-B on page 1-4 for the
optional equipment part numbers.