Appendix a specifications, Network interface - shdsl port, Cbr interface – Verilink WANsuite 6450 (34-00326) Product Manual User Manual
Page 191: Appendix a, specifications, Pecifications, Network interface − shdsl port
S p e c i f i c a t i o n s
A-1
A
P P E N D I X
A
A
PPENDIX
A
S
PECIFICATIONS
Network Interface
−
SHDSL Port
Line Rate:
200 kbps to 2.320 Mbps
Line Framing:
ATM Transport (G.991.2 E9)
Line Code:
Trellis Coded Pulse Amplitude Modulation
Connection:
RJ11C, 8-pin modular jack at 135
Ω
Network Protocol:
ATM
Adaptation Layers:
AAL1 and AAL5
AAL5 Encapsulation:
RFC1483
−
LLC MUX
AAL5 Encapsulation Mode:
Routed IP
Number of AAL5 PVCs:
Up to 16
CBR Interface
Timing Source:
Network, AAL1 Adaptive
AAL1 Encapsulation:
Per af-vtoa-0078.000
Partial Cell Fill
3-46 bytes
Selectable Receive Cell
100 (1 ms) default
Delay (CDV)
E1
Line Rate:
2.048 Mbps (
±
50 bps)
Line Framing:
CAS, CCS, or 2 Mbits unframed
Line Code:
AMI or HDB3
Input Signal:
30 dB of cable loss
Connection:
RJ-48 jack at 120
Ω
(
±10 %)
Output Signal:
3.0 V (
±
10 %) base -peak into 120
Ω
Mode:
Short- or long-haul
Jitter Control:
per G.823 Sections 2.1 and 3.0
Number of DS0s Selectable:
From 1 to full E1 (noncontiguous)