Verilink WANsuite 6450 (34-00326) Product Manual - Manual (Page 84)

3-56 W A N s u i t e 6 4 5 0
The Static ARP Table screen provides the following user-activated buttons:
ARP Details Screen
Access the ARP Details screen (Figure 3.48) by clicking on the appropriate
numbered link under the “Index” column on the ARP Table screen.
Figure 3.48 ARP Details Screen
Endpoint Endpoint name (or Interface) through which to send the IP packet to reach the
defined IP Address. Currently, this is always the LAN.
IP Address IP Address of the circuit.
Values: 0.0.0.0
−
255.255.255.255
Default: 0.0.0.0
MAC Address MAC Address of the Host to be reached.
Values: A 6-byte value
Default: 00-00-00-00-00-00
ARP Status Displays whether this ARP is enabled or disabled.
Values: Enable, Disable
Default: Enable
The ARP Details screen provides the following user-activated buttons:
Button Function
ARP Details Displays details of ARP tables.
Dynamic ARP Table Displays the dynamically learned MAC <-> IP Address.
Add New Adds a new static ARP.
Button Function
Submit Sets any values that have been changed.
Static ARP Table Returns you to the previous screen.
Delete ARP Deletes this static ARP.