Visara CNA-8000 - Manual (Page 11)

CNA-8000 Users Guide and Maintenance Manual
707157-001 1-1
Chapter 1. Safety Information and Technical
Specifications
Electrical Safety Guidelines
Warning: To avoid electrical shock, check the power cords as follows:
Checking the Power Cords
 Use the exact type of power cords as required.
 Be sure to use power cord(s) that came with safety
certifications.
 The power cord(s) must be compliant with the AC voltage
requirements in your region.
 The power cord plug cap must have an electrical current rating
that is at least 125% of the electrical current rating of this
product.
 The power cord plug cap that plugs into the AC receptacle on
the power supply must be an IEC 320, sheet C13, type female
connector.
 Be sure to disconnect the power supply before accessing the
server or its components.
 Plug the power cord(s) into a socket that is properly grounded
before turning on the power.
Warning: Follow the guidelines below to avoid possible damages to the
system or injury to yourself.
General Electrical Safety Guidelines
 Be aware of the locations of the power switches on the chassis
and in the room, so you can disconnect the power supply if an
accident occurs.
 Take extra precautionary measures when working with high
voltage components. It is not recommended to work alone.
 Before removing or installing main system components, be
sure to disconnect the power first. Turn off the system before
you disconnect the power source.
 Use only one hand when working with powered-on electrical
equipment to avoid possible electrical shock.
 Use rubber mats specifically designed as electrical insulators
when working with computer systems.
 The power supply or power cord must include a grounding