Visara FEP-4600 Planning Guide - Manual (Page 107)

37x5 to FEP-4600 Migration and Planning Guide
707117-003 10-1
Chapter 10. Replacing a Remote Front End
This function is only available on older FEP-4600 platforms and is not supported for new
installations.
Remote front end replacements (one that normally requires remote loading and does not
have a directly attached host) by the FEP-4600 are handled by replacing both the local
front end and the remote front end with a pair of FEP-4600s clustered together. Through
the clustered platforms, connections that were previously handled by the remote front end
will appear much the same as a local connection from a FEP-4600. Refer to the diagrams
below.
3745 3745
PU2
Nodes
PU4/SNI