Visara SSL1000 - Manual (Page 19)

707092-001 2-9
Chapter 2. Installation and Configuration
View Log
The logging parameters are defined on the configuration screen (click the Configure button
on the left navigational menu.). You may select to have the following events logged:
• Connects
• Disconnects
• Failovers
• Inactivity Timeouts
• Max Connections Exceeded
• Authentication Failures
• Configuration Changes
• Server Startups
• Server Restarts
• Server Shutdowns
To view the log (an example is shown below) click the View Log button on the left
navigational menu.
The log shows the oldest entries at the top, with the most recent entries at the bottom.