Shell commands and diagnostics, Restart server, Reboot server – Visara SSL1000 User Manual
Page 20
2-10
707092-001
SSL1000 User’s Manual
Shell Commands and Diagnostics
Shell commands execute the Linux bash Shell using the browser interface. Shell
commands that need to be manually interrupted or require user input must be avoided.
For instance, “Ping” with no count (“-c” parameter), would run until the server is
rebooted.
Restart Server
Select to restart the server application. You will be asked to confirm the action. This
function takes only a few seconds.
Note:
This will disconnect all of the current mapped connections. The administrator
interface will remain active.
Reboot Server
Select to reboot the server. You will be asked to confirm the action. Rebooting the
server takes about one minute.
Note:
This will disconnect all connections including the administrative interface.