Watson-Marlow FC32 - Manual (Page 9)

OPERATOR’s MANUAL
FC32
FC32 OM 1.02 EN Version: 1.02 Page 9 of 10
7 Accessories
For each cap and bottle size a customised screw head as well as bottle grip is needed. Watson-
Marlow Flexicon manufactures the screw heads and grip according to bottle and cap samples.
Accessories
Screw head
89-110-010
Grip 89-115-050
8 Cleaning and maintenance
8.1 Cleaning
Daily cleaning will not be necessary except for the normal routine cleaning of production equipment.
Correct cleaning is carried out by washing the FC32 with a firmly wrung cloth or paper towel, and
subsequently the machine is wiped.
NOTE: The FC32 may not be cleaned by pouring or splashing liquids onto the machine.
8.2 Maintenance
The screw capping air motor requires lubrication in order to function optimal.
It is recommended to supply the air inlet with one drop of turbine oil before and after operation; this is
done by removing the air hose at the top of the screw unit and then supplying the air inlet with one
drop of oil.
Recommended oil: Rocol Foodlube Multi-Lube with PTFE.
All other movable parts in FlexCap 32 are maintenance-free; no maintenance is required apart from
normal cleaning of the equipment.
If service should be needed, please contact your supplier or Watson-Marlow Flexicon A/S.
9 Technical specifications
Power supply 110/240 VAC 50/60 Hz with earth
Power consumes. 50 W max.
Air supply 5 to 7 bar
Air Capacity 150 l/min max
Torque Variable from 1 - 4 Nm
Cap Size Diameter. Ø65mm Height 40 mm max.
Bottle size Diameter. Ø15-100 mm Height 240mm max.
Housing Anodised aluminium
Ingress Protection IP31
Weight 16 kg
Order number 93-110-110