Welltech WG5260 V.6.1 - Manual (Page 69)

Welltech Computer Co., Ltd.
WellGate 5260 User Guide – V6.1.0 - 69 -
Figure 7.5-5
Parameters:
• Group ID: The group ID
• Description: The description
Click the Detail button:
Figure 7.5-6
Parameters:
• DNIS: Called party number used for filter
• Access Mode:
- Allow:
The called numbers are allowed for calls
- Disallow: The called numbers are disallowed for calls
☻Note: If in the system has both allowance and disallowance setup, the
system will check allowance first and disallowance later. If only
disallowance inputted all DNIS will allow to work except
disallowed DNIS. If only allowance inputted, only those DNIS from
allowance list will work.
Number Replace
The purpose of “Number Replace” is to replace called number or
calling number for PSTN or IP. It must be used in call flow to take effect.