Welltech WG5290 - Manual (Page 89)

Welltech Computer Co., Ltd.
WellGate 5290 User Guide – V6.1 - 89 -
Network
DNS Server Setting:
Step 1: After successfully logon to the system, we need to change the
network configuration. Click Control>Network to setup the network
parameters as figure 8.3-1.
Figure 8.3-1
Parameter:
• Primary DNS Server: Primary DNS Server IP network
• Secondary DNS Server: Secondary DNS Server IP network
• Host Name: Host name used to register to DNS Server
• Domain Name: Domain name used to
• Dynamic DNS Registration: Enable Dynamic DNS registration or not
SNMP
Start path: Click Control>SNMP>Community
Figure 8.4-1
Parameter:
• Community Name: Community name for network manager system
accessing
• Access Rights: Giving access right to the community