Westermo LRW-102 - Manual (Page 21)

21 6650-2260
Multidrop application
Prepare the fibre optical network:
Multidrop, mid units (CH 1 & CH 2). Set switch S2:2 to ON. …
Multidrop, end units (CH 1 only). All switches should be set to OFF. …
Connect the fibre links between the units. …
Connect the power supply to all units. …
The Fibre links should be in operation, indicated by active CH 1 and CH 2 LED's. …
Connect the LON equipment to the LRW-102. …
The Multidrop application is up and running. …
Note! LRW-102PP can be used as end unit.
TX RX TX RX TX RX TX RX TX RX TX RX TX RX TX RX
CH 2 CH 1 CH 2 CH 1 CH 2 CH 1 CH 2 CH 1
LON
Network
LON
Network
LON
Network
LON
Network