ZeeVee HDbridge 2500/2600 Series (DVB-T/C) - Manual (Page 9)

HDbridge 2500/2600-EU Configuration Guide
|
Page 9
THE RF TAB
Allows you to change the RF
power output. You can also
change from DVB-T to DVB-C
and from CCIR to None.
THE DEVICE TAB
Allows you to change the
device password and update
firmware.
THE NETWORK TAB
Allows you to assign a static
IP address.
THE SUPPORT TAB
Provides technical support
contact information and
allows you to send logs for
troubleshooting.
Using the other Maestro tabs
Click on any other Maestro tab to configure your unit as needed. We provide brief information below. Please click on the Help
button on each tab or refer to the Support section of our website for further detail on configuration options.
Manage All allows you to view and
configure all units on your network.
Group Action bar allows you to set configuration for
all selected units actively managed on your network.