Step 2: prepare the flex conduit – ACTi KCM-5211E User Manual
Page 10
Advertising
Hardware Manual
Step 2: Prepare the Flex Conduit
1.
From the network side, insert the Ethernet cable and other cables (if any) through the flex
conduit.
NOTE:
To connect an external power adaptor, digital input/output (DI/DO) or serial devices,
insert the cables without connectors through the flex conduit and as well as audio
input/output device cables at this point.
2.
Insert the clamping nut through the flex conduit.
3.
Insert the sealing insert and attach it at the end of the flex conduit.
Advertising