Step 3: prepare the flush mount – ACTi Outdoor Dome on Dropped Ceiling with Flush Mount User Manual
Page 8
Advertising
Installation Guide
Step 3: Prepare the Flush Mount
1.
Route the flex conduit or network cable to dangle through the hole on the ceiling.
Using Flex Conduit
Using Naked Cable
2.
Peel off the lining of the three (3) foam rubber pads and attach a rubber pad to each
retaining bracket.
3.
Using a screwdriver, loosen the retaining brackets according to the thickness of the ceiling.
or
Advertising
This manual is related to the following products: