Step 3: install the mount kit (pmax-0110) – ACTi Indoor PTZ on Straight Wall with Accessory Sets of PMAX-0305 User Manual
Page 6
Installation Guide
Step 3: Install the Mount Kit (PMAX-0110)
NOTE:
To illustrate how to connect other device cables to the camera, the following images show
the cable of an external power adapter (not included in the package). Same cable routing applies
to other devices. To connect a power adapter or a digital input/output device, the bundled terminal
block must be attached to the cables. For more information on connecting the terminal blocks,
refer to the camera model Hardware Manual downloadable from the website
.
1.
Insert the cable(s) from the Heavy Duty mount into the mount kit and route them to pass
through the outer bracket.
2.
Align the slot of the mount kit to the tab inside the Heavy Duty Mount and install the mount kit.
3.
Twist the mount kit to align the screw holes and attach the two (2) mounting screws (included
in the mount kit package).