Step 2: unpack the camera – ACTi Indoor Dome (D5xE5x) on Dropped Ceiling with Flush Mount User Manual
Page 4
Advertising
Installation Guide
Step 2: Unpack the Camera
NOTE:
To avoid scratches or leaving fingerprints on the dome cover, it is recommended to retain
the plastic covering the dome cover until the camera is completely installed.
1.
Slide the mounting plate counter-clockwise to detach it from the camera.
2.
Remove the silicon bag.
3.
Slide the dome cover counter-clockwise to remove the cover from the camera.
NOTE:
To avoid scratches or leaving fingerprints on the dome cover, it is recommended to
retain the plastic covering the dome cover until the camera is completely installed.
Advertising
This manual is related to the following products: