Step 5: install the flush mount – ACTi Indoor Dome (D5xE5x) on Dropped Ceiling with Flush Mount User Manual
Page 7
Advertising
Installation Guide
Step 5: Install the Flush Mount
1.
Route the network cable through the flush mount and insert the flush mount through the hole
on the ceiling.
2.
Push to position the retaining brackets to hold the mount on the ceiling.
NOTE:
The illustration below shows how the flush mount will look like when viewed from
inside the ceiling. In case you cannot access inside the ceiling, use your fingers to position
the retaining brackets through the hole.
Advertising
This manual is related to the following products: