ACTi NVR 3 Corporate - Manual (Page 116)

www.acti.com
NVR 3 Corporate System Administrator ’s Manual
116
Step 4: Add Video Source
In edit mode, move the mouse over the channel
and click . You may also directly pull a
camera from the Device panel to your desired
channel.
Remove the camera view: right-click on the channel and s elect “ Remove ”.
Step 5: Add a Map
By adding a map, you put a picture on the channel, where you may place camera icons to
make it an “ e-Map .
In edit mode, move the mouse over the channel
and click to upload a map. Please input the
Map Name , select the image location (file format
must be JPG) and click “ Apply ”.