ACTi NVR 3 Corporate - Manual (Page 82)

www.acti.com
NVR 3 Corporate System Administrator ’s Manual
82
Set Routine Schedule
Here you can configure camera ’s recording schedule on 7 days / 24 hours basis. The schedule
is split into segments of 20-minute-length. By default, once a device is added to the system, its
schedule is automatically set to full time schedule recording and event handling. You should
configure it according to your system plan.
Go to Setup Schedule tab, click on Routine Schedule tab:
1. Select the recording mode from Recording Mode Selection Bar
:Continuously records this channel
: Records only the period of a detected motion (the length of which is
defined in Recording Settings , see Configure the Recording File Properties on page 80).
Please make sure you have configured the motion settings on Setup page  Devices
tab in advance.
:Event handling is activated.
(Please refer to Event Management on page 88)
: Clear the setting
+ : Continuous recording + event handling
+ : Event recording + event handling
2. Click and drag over the “Time Track” to set time period.
Time Track
Time Setting Quick Buttons
Recording Mode Selection Bar
1
1
2