ACTi NVR 3 V3.0.09 - Manual (Page 122)

www.acti.com
NVR 3.0 System Administrator’s Manual
122
Restore System Data
Before starting restoring the system, make sure you have done the following:
(1) Re-activate the license. If you have done un-installation previously, and the number of
channels to be recovered is over 16. Please prepare the license key information for online
activation or the activation file(.lic) for offline activation, and follow the instructions in License
and Activation on page 24 to activate your license. The license should be activated before
settings are restored so that the licensed channels are ready for recovery.
(2) The backup file(.xml).
To start,
1. Go to Setup page System tab Backup / Restore
2. In Restore section, c lick “Browse” to select the backup file, and then click “Restore” to
start restoring the settings.
3. The restoring process requires logging out of NVR server. After restoring is done, you may
log in using your previous user account properties.
1
2