ACTi NVR 3 V3.0.09 - Manual (Page 66)

www.acti.com
NVR 3.0 System Administrator’s Manual
66
How to Do Live PTZ Operation
To configure PTZ settings, you need to view the live streaming while manipulating the PTZ
controls simultaneously in this window.
There are two kinds of PTZ navigation:
Optical PTZ Navigation
1. Get the live view from Live Preview window:
Make sure the “Enable PTZ” is checked, a red crosshair will appear on the Live Preview
window, if the device is in Dual Stream mode, this window will always shows the stream
set for live view. You may click on to switch between the streams.
2. Use the mouse to do the following PTZ operations:
● To execute optical Panning and Tilting, click anywhere on the live window to allow the
camera to move in that direction. The length of the direction indicator is proportional to the
Pan and Tilt speed. The farther you place the cursor from the center, the faster the
Pan/Tilt movement.
● To execute optical Zoom in or Zoom out, scroll the mouse wheel forward to zoom in;
scroll the mouse wheel backward to zoom out.
Live Preview
Important Notice
Note that the functions supported for devices connected using ONVIF are live streaming and
adjustments to video image settings.