Add video source, Act i ivs server 1 user’s manual – ACTi IVS Server 1 V2.02.06 User Manual
Page 19
Advertising
ACT
i IVS Server 1 User’s Manual
Add Video Source
Now that you have your
ACTi IVS Server 1
open, you are ready to add some video sources so
that they can be analyzed!
Before adding a video source, make sure you have a working NVR Server and confirm its
following properties:
(1)
IP Address
,
(2)
HTTP Port
,
(3)
Account Name
and
(4)
Password
.
To add a video source, follow these steps:
1.
Right-click
on the
Source List Window
, and select
“Add New NVR”
.
2.
After selecting
“Add New NVR”
, a popup window will appear as shown below.
Advertising
This manual is related to the following products: