ACTi XNR-4200 V1.02.13 User Manual
Page 80
Advertising
XNR-4200 User’s Manual 1.02.13
Preset Points
On the Preset Points Setup section, you may perform setups and operations about PTZ preset
points.
1. Set Button: To setup a PTZ Preset point, move the camera to your desired view
angle (including pan, tilt and zoom) on the live view
. After you‟re satisfied with the
view, please click this button to enter a name for the Preset point and.
2. Clear Button: Click this button to delete this Preset point from both Standalone NVR
and Device
Note: After you finish setting or de
leting preset points, please click “Save” to ensure the
changes are properly saved.
Advertising
This manual is related to the following products: