Amer Networks SR24G2 - Manual (Page 16)

10
U
NDERSTANDING
LED I
NDICATORS
The front panel LEDs provide instant status feedback, and, helps monitor and
troubleshoot when needed.
Figure 6. LED indicators of the Switch
Power LED
POWER
On
: When the Power LED lights on, the Switch is receiving
power.
Off : When the Power LED turns off or the power cord has
improper connection.
Ports 1~24 Status LEDs
LINK/ACT
On
: When the LED lights on, the respective port is connected to the
10/100Mbps Ethernet network.
Blinking : When the LED is blinking, the port is transmitting or receiving data on
the 10/100Mbps Ethernet network.
Off : No link.
100Mbps
On
: When the LED lights on, the respective port is connected to
a 100Mbps Ethernet network.
Off : The respective port is connected to a 10Mbps Ethernet
network, or no link