Amer Networks SR24G2 - Manual (Page 2)

Amer.com
7259 Bryan Dairy Road, Largo, FL 33777
© Amer.com Corp., 1997-2003 All rights reserved. No part of this publication
may be reproduced in any form or by any means or used to make any derivative
such as translation, transformation, or adaptation without permission from
Amer.com, as stipulated by the United States Copyright Act of 1976.
Amer.com reserves the right to make changes to this document and the
products which it describes without notice. Amer.com shall not be liable for
technical or editorial errors or omissions made herein; nor for incidental or
consequential damages resulting from the furnishing, performance, or use of
this material.
Amer.com is a registered trademark of Amer.com. All other trademarks and
trade names are properties of their owners.
FCC Class A Certification Statement
Model SR24G2 FCC Class A
This device complies with Part 15 of the FCC rules. Operation is subject to the
following two conditions: (1)This device may not cause harmful interference,
and (2)This device must accept any interference received, including
interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class
A digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If the equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more of
the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.