Amer Networks E5Web GUI - Manual (Page 426)

InControl
Follow the same steps used for the Web Interface below.
Web Interface
Outgoing Rule:
1. Go to: Policies > Add > IPRule
2. Now enter:
• Name: H323AllowOut
• Action: Allow
• Service: H323
• Source Interface: lan
• Destination Interface: any
• Source Network: lan_net
• Destination Network: 0.0.0.0/0 (all-nets)
• Comment: Allow outgoing calls
3. Click OK
Incoming Rule:
1. Go to: Policies > Add > IPRule
2. Now enter:
• Name: H323AllowIn
• Action: Allow
Chapter 6: Security Mechanisms
426