Amer Networks E5Web GUI User Manual
Page 696
1.
Go to: Policies > Firewalling > Main IP Rules > Add > IP Rule
2.
Enter:
•
Name: web_slb
•
Action: SLB_SAT
•
Service: HTTP
•
Source Interface: wan
•
Source Network: all-nets
•
Destination Interface: core
•
Destination Network: wan_ip
3.
Select tab SAT SLB
4.
Under Server Addresses add server_group to Selected
5.
Click OK
D. Specify a NAT rule for internal clients access to the servers:
1.
Go to: Policies > Firewalling > Main IP Rules > Add > IP Rule
2.
Enter:
•
Name: web_slb_nat
•
Action: NAT
•
Service: http-all
•
Source Interface: lan
•
Source Network: lan_net
•
Destination Interface: core
•
Destination Network: wan_ip
3.
Click OK
E. Specify an Allow IP rule for the external clients:
1.
Go to: Policies > Firewalling > Main IP Rules > Add > IP Rule
2.
Enter:
•
Name: web_slb_allow
•
Action: Allow
•
Service: http-all
•
Source Interface: wan
Chapter 10: Traffic Management
696