Aqua Lung WTX Buoyancy System - Manual (Page 10)

FEATURES
Apeks’ harnesses, buoyancy cells and accessories are fully modular. They can be mixed and
matched to create the ideal system for you and the type of diving you choose to do. In addition, it
is easy to customize your system by adding or changing out various pieces of hardware. Whether
you want a travel friendly rig to dive in the tropics or a solid technical rig to dive deep, Apeks has
the right buoyancy configuration for you.
Removable Back Pad
VERSATILITY THROUGH MODULARITY
The back pad in the WTX harness is considered optional
and can be removed. It is held in place by simple hook
and loop.
Back Plate Allowances
If desired, the WTX harness gives the option of inserting
an Apeks back plate for additional weight or support. If you
are using nuts and bolts to attach a cylinder or cylinders to
the WTX harness, then a back plate must be used.
Dual Cylinder band Capability
A quick and easy way to attach a single cylinder to the WTX
harness is the use of standard dual cylinder bands. The
bands can be run directly through the back of the harness
with or without a back plate installed.
Open Shoulder Design
The 2-inch webbing on the shoulders of the WTX harness
is an open design. While the WTX harness comes with a
2-inch angled D-ring on each shoulder, the shoulder can
be opened up to change out or add additional hardware.
NOTE: Optional GripLock™ cylinder bands
(PN 428240) may be purchased separately
for the WTX Harness.
© 2014 Apeks
Table of Contents