Aqua Lung WTX Buoyancy System - Manual (Page 31)

MOUNTING A SINGLE CYLINDER OR TWIN CYLINDERS USING NUTS AND BOLTS
To bolt a single cylinder or twin cylinders to the WTX harness, an Apeks back plate
must be inserted into it. Ideally, the bolts on a single tank attachment kit or on a
set of twin bands should be 11 inches (28 cm) on center. Remove the back pad
from the WTX harness. Insert the bolts through the appropriate grommets on the
bladder, and through the appropriate grommets on the WTX harness. Secure with
flat washer and nut.
© 2014 Apeks
Table of Contents