Dealer inspection and service – Aqua Lung WTX Buoyancy System User Manual

Page 6

Advertising
background image

DEALER INSPECTION AND SERVICE

WARNING:

DO NOT attempt to perform any disassembly or service of your BC. Service

requiring disassembly must only be performed by a factory-trained Apeks technician. To

obtain service or repair, such as power inflator service or replacement of the bladder, see

an Authorized Apeks Dealer or Distributor.

1. It cannot be assumed that the BC is in good working order on the basis that it has received little

use since it was last serviced. Remember that prolonged or improper storage can still result

in internal corrosion and/or deterioration of o-ring seals and valve springs, as well as bladder

seam degradation.

2. It is imperative that you obtain prescribed dealer service for your BC at least once a year from an

authorized dealer, including a general air leak inspection and complete overhaul of the power

inflator and OPR valve. Your BC may require this service more frequently, depending on the

amount of use it receives and the environmental conditions it is used in.

3. If the BC is used for rental or training purposes in salt, chlorinated, or silted fresh water, it will require

prescribed dealer service every three to six months. Use in chlorinated water will greatly accelerate

the deterioration of most components, and require more frequent service.

4.

DO NOT attempt to perform any disassembly or overhaul service of your BC. Doing so may cause

the BC to dangerously malfunction, and will render the warranty null and void. All service must be

performed by an Authorized Apeks Dealer or Distributor.

NOTE:

It is important to obtain prescribed dealer service for your bc at least once

annually, from an Authorized Apeks Dealer or Distributor. your personal safety and

the mechanical integrity of your bc depends on it.

© 2014 Apeks

Table of Contents

Advertising