Aqua Lung WTX Buoyancy System - Manual (Page 34)

The metal waist buckle can be mounted of either side for the waistband.
POSITIONING WAIST BUCKLE
If you would like to switch the buckle to the other side,
weave the buckle as shown. Don the WTX harness with
cylinder(s) and your normal exposure suit. Run the 2-inch
waistband through the buckle so that the buckle will be
positioned where you like.
Excess webbing may be cut with scissors and the end burned with a lighter to prevent unraveling.
NOTE: Do not cut the excess webbing so short that you cannot enlarge it in the future to
compensate for a thicker exposure suit.
© 2014 Apeks
Table of Contents