ARAG ORION - Manual (Page 4)

4
- To ensure trouble-free operation, comply with the indicated installation layout (Fig. 2a and Fig. 2b);
NEVER lay cable upward.
HORIZONTAL ASSEMBLY
OK
OK
VERTICAL ASSEMBLY
- Comply with the correct fluid inlet-outlet direction, as indicated by the arrow printed on the
flowmeter body (Fig. 3).
IN OUT IN OUT
Use inlet and outlet pipes of the same diameter as the internal passages of the flowmeter;
for further information, see table 4 (Chap. 6 - Technical data).
Fig. 2a
Fig. 2b
Fig. 3