De en fr pl ru – Eneo GXC-1720M User Manual
Page 19
Advertising
19
DE
EN
FR
PL
RU
Hardware Installation
1. Plug in the power connection to the IP camera.
2. Plug in the IP camera cable.
3. Confirm the correct network connection status (PC/HUB/ IP camera).
4. In the PC IE Browser, key in the camera’s IP online to link up to the live
first page.
NOTE: Red light power indicator of the IP Box Camera: it flashes when
the power supply is on.
Two-color network indicator:
(1) It is off when the network is disconnected.
(2) The green light goes on when the network is connected; the
orange light flashes indicate the network connection status.
The Full Manual is available from the eneo web site at
www.eneo-security.com or from the CD supplied with this product.
Further information
Advertising
This manual is related to the following products: