Eneo VKC-900IR36 - Manual (Page 3)

2
Notes on safety
Please also pay attention to the enclosed safety instructions, and carefully read
through this instruction guide before initial operation.
Important points of advice are marked with a caution symbol.
Overview
Introduction
The product is a 900 TVL infrared bullet camera that uses a SONY 1/3“Exmor
CMOS image sensor which can capture high-quality and high-resolution images.
Functions and Features
• High sensitivity: The camera uses a SONY 1/3“Exmor CMOS image sensor
and has an illumination as low as 0.01 Lux. When infrared-ray (IR) LEDs are on,
the illumination can reach 0 Lux.
• On-screen display (OSD) menus: The camera provides OSD menus that sup-
port six languages, facilitating commissioning and setting camera parameters.
• Digital noise reduction (DNR): The camera uses 3D DNR technology that signi-
ficantly optimizes images in low-illumination environments by improving signal to
noise ratio (SNR).
• High resolution: The horizontal resolution is up to 900 TVL, which makes the
image clear and fine.
• Privacy masking: The camera allows you to define a maximum of 8 quadrilate-
ral mask areas, which meets privacy requirements.
• Built-in mobile optical filter (optional)
• Intelligent IR technology: The intelligent IR technology enables the camera to
adjust shutter, aperture, and gain depending on image brightness in black and
white mode, optimizing the infrared effect and preventing center overexposure.
• Built-in efficient IR-emitting tubes: With the built-in tubes, the camera can cap-
ture quality images even in total darkness and the nighttime.