Ensemble Designs 5400 Dual Sync Generator and Test Signal Generator with HD Tri-Level Sync - Manual (Page 16)

The Secondary menu screen shown below allows you to set the following parameters for
the Secondary generator output:
• Sec Source – select the Secondary generator reference source from either Config
Ref (defined in the Config menu), Internal or the choice to Track Primary.
• Standard – select the desired line standard output from 525–60 Hz or 625–50 Hz.
• Setup – sets setup to On or Off for 525–60 Hz line output signals.
The Sync Lock window shows what standard the module is locked to or No Lock.
Model 5400 Dual Sync Gen/Test Signal Generator
5400-16