Ensemble Designs 5400 Dual Sync Generator and Test Signal Generator with HD Tri-Level Sync - Manual (Page 23)

Model 5400 Dual Sync Gen/Test Signal Generator
Avenue Touch Screen Remote Configuration
The Avenue Touch Screen remote control status menu for this module is illustrated and
explained below. Refer to the 5400 Parameter Table for a summary of available parame-
ters that can be set remotely through the menus illustrated. For more information on
using Avenue Touch Screen, refer to the Avenue Touch Screen data pack that came with
the option.
Parameter fields that are grayed out can indicate one of the following conditions:
• An option is not installed.
• The function is not active.
• The module is locked.
• The User Level set with Avenue PC is not accessible from the current User Level.
5400 Avenue Touch Screen Menus
The Primary menu screen shown below allows you to set the following parameters for the
Primary generator output:
• Pri Source – select the Primary generator reference source from either Config
Ref (defined in the Config menu) or Internal.
• Standard – indicates what line standard the generator is locking to.
• Setup – sets setup to On or Off for 525–60 Hz line output signals.
The Sync Lock window shows what standard the module is locked to or No Lock.
5400-23