H3C Technologies H3C S12500-X Series Switches - Manual (Page 39)

31
Figure 24 Installing the LPU
(1) Push the LPU into the slot until the brakes touch the slot edges tightly
(2) Press the ejector levers inward
(3) Fasten the captive screws on the LPU
Installing switching fabric modules
CAUTION:
•
You must install a minimum of one switching fabric module for the switch.
• When you use the LSXM1TGS24FX1 LPU on the switch, first install the switching fabric modules in the
first three switching fabric module slots (from top to bottom or from left to right).
The switch has six switching fabric module slots.
1
2
2
3
3