H3C Technologies H3C S10500 Series Switches - Manual (Page 85)

74
Task Remarks
Setting the spanning tree mode
Required
Configure the device to work
in STP-compatible mode.
Configuring the device priority Optional
Configuring the timeout factor Optional
Configuring the maximum port rate Optional
Configuring path costs of ports Optional
Configuring the port priority Optional
Configuring the mode a port uses to recognize/send MSTP
packets
Optional
Enabling the output of port state transition information Optional
Configuring the
leaf nodes
Enabling the spanning tree feature Required
Configuring protection functions Optional
Complete the following tasks to configure RSTP:
Task Remarks
Setting the spanning tree mode
Required
Configure the device to work
in RSTP mode.
Configuring the root bridge or a secondary root bridge Optional
Configuring the device priority Optional
Configuring the network diameter of a switched network Optional
Configuring spanning tree timers Optional
Configuring the timeout factor Optional
Configuring the maximum port rate Optional
Configuring edge ports Optional
Configuring the port link type Optional
Configuring the mode a port uses to recognize/send MSTP
packets
Optional
Enabling the output of port state transition information Optional
Configuring
the root
bridge
Enabling the spanning tree feature Required
Setting the spanning tree mode
Required
Configure the device to work
in RSTP mode.
Configuring the device priority Optional
Configuring the timeout factor Optional
Configuring the maximum port rate Optional
Configuring
the leaf
nodes
Configuring edge ports Optional