H3C Technologies H3C S10500 Series Switches - Manual (Page 15)

14
.....Done!
****************************************************************************
* *
* BootWare, Version 1.00 *
* *
****************************************************************************
Compiled Date : Jul 1 2010
CPU Type : XLS408
CPU L1 Cache : 32KB
CPU Clock Speed : 1000MHz
Memory Type : DDR2 SDRAM
Memory Size : 1024MB
Memory Speed : 533MHz
BootWare Size : 508KB
Flash Size : 128MB
BASIC CPLD Version : 3.0
EXTEND CPLD Version : 3.0
PCB Version : Ver.A
BootWare Validating...
Press Ctrl+B to enter extended boot menu...2
NOTE:
•
To enter the BootWare menu, press Ctrl+B within 5 seconds when "Press Ctrl+B to enter BootWare
menu..." appears. If you fail to do so, restart the switch and try again.
• The output varies with switch models.
Press Ctrl+B. The system prompts you to enter the BootWare password:
Please input BootWare password:
Enter the password, and press Enter. The BootWare menu appears. (By default, no password is set, and
you can directly press Enter to enter the BootWare menu.)
CAUTION:
•
Keep in mind the BootWare password.
• If you fail to provide the correct password three times, you have to reboot the switch to enter the
password again.
Note: The current operating device is flash
Enter < Storage Device Operation > to select device.
===========================<EXTEND-BOOTWARE MENU>===========================
|<1> Boot System |
|<2> Enter Serial SubMenu |
|<3> Enter Ethernet SubMenu |
|<4> File Control |