H3C Technologies H3C S10500 Series Switches User Manual
Page 7
6
This command will update bootrom file on the specified board(s),
Continue? [Y/N]:y
Now updating bootrom, please wait...
Start accessing bootflash chip...
Bootrom update succeeded in slot 1.
# Upgrade the BootWare for the LPU in slot 3 (upgrade other LPUs in the same way).
<Sysname> bootrom update file flash:/lpu.btw slot 3
This command will update bootrom file on the specified board(s),
Continue? [Y/N]:y
Now updating bootrom, please wait...
Board has finished loading file on Chassis 0 Slot 3.
Start accessing bootflash chip...
Bootrom update succeeded in slot 3.
# Upgrade the BootWare for the switching fabric module in slot 6.
<Sysname> bootrom update file flash:/lpo.btw slot 6
This command will update bootrom file on the specified board(s),
Continue? [Y/N]:y
Now updating bootrom, please wait...
Board has finished loading file on Chassis 0 Slot 6.
Start accessing bootflash chip...
Bootrom update succeeded in slot 6.
# Reboot the switch to validate the upgrade.
<Sysname> reboot
Start to check configuration with next startup configuration file, please wait.
........DONE!
This command will reboot the device. Continue? [Y/N]:y
Reboot device by command.
2.
Upgrade system software
# Specify the file newest.bin as the main system software image to be used at the next startup of the
active MPU in slot 0.
<Sysname> boot-loader file flash:/newest.bin slot 0 main
This command will set the boot file of the specified board. Continue? [Y/N]:y
The specified file will be used as the main boot file at the next reboot on slot 0!
# Specify the file newest.bin as the main system software image to be used at the next startup of the
standby MPU in slot 1.
<Sysname> boot-loader file slot1#flash:/newest.bin slot 1 main
This command will set the boot file of the specified board. Continue? [Y/N]:y
The specified file will be used as the main boot file at the next reboot on slot 1!
# Reboot the switch to validate the upgrade.
<Sysname> reboot
Start to check configuration with next startup configuration file, please wait.
........DONE!
This command will reboot the device. Continue? [Y/N]:y
Reboot device by command.