H3C Technologies H3C S5560 Series Switches - Manual (Page 25)

16
d. Supporting the bottom of the switch, align the chassis rails with the slide rails on the rack posts,
as shown in Figure 20 . Work with another person to slide the chassis rails along the slide rails
until the mounting brackets are flush with the rack posts.
e. Use M6 screws (user-supplied) to attach the mounting brackets to the rack, as shown in Figure
21 .
To secure the switch in the rack, make sure the front ends of the slide rails reach out of the
chassis rails.
Figure 20 Mounting the switch in the rack (1)