H3C Technologies H3C S5500 Series Switches - Manual (Page 26)

18
SFP/SFP+/XFP transceiver modules and SFP+/CX4
cables
NOTE:
•
To guarantee the functionality of the SFP/SFP+/XFP ports, always use H3C transceiver modules on the
S5500-EI Switch Series.
• The transceiver modules available for this switch are subject to change over time. For the most up-to-date
list of transceiver modules, consult your H3C sales representative or technical support engineer.
• For the transceiver module specifications, see H3C Low End Series Ethernet Switches Pluggable Modules
Manual. For how to install a transceiver module, see H3C Pluggable SFP/SFP+/XFP Transceiver
Modules Installation Guide.
Table 18 GE SFP transceiver modules
Transceiver module
Central
wavelength Connector Fiber
Max transmission
distance
SFP-GE-SX-MM850-A 850 nm LC
50/125 μm multimode
optical fiber
550 m (1804.46 ft)
62.5/125 μm
multimode optical fiber 275 m (902.23 ft)
SFP-GE-LX-SM1310-A
1310 nm LC
9/125 μm single mode
optical fiber
10 km (6.21 miles)
SFP-GE-LH40-SM1310 40 km (24.86 miles)
SFP-GE-LH40-SM1550
1550 nm LC
40 km (24.86 miles)
SFP-GE-LH70-SM1550 70 km (43.50 miles)
SFP-GE-LH100-SM1550
100 km (62.14
miles)
SFP-GE-LX-SM1
310-BIDI
These two
transceiv
er models
should be
used in
pairs.
TX: 1310 nm
RX: 1490 nm
LC
9/125 μm single mode
optical fiber
10 km (6.21 miles)
SFP-GE-LX-SM1
490-BIDI TX: 1490 nm
RX: 1310 nm
SFP-GE-T N/A RJ-45 Twisted pair cable 100 m (328.08 ft)
Table 19 FE SFP transceiver modules
Transceiver module
Central
wavelength Connector Fiber
Max transmission
distance
SFP-FE-SX-MM1310-A
1310 nm LC
62.5/125 μm
multimode optical fiber 2 km (1.24 miles)
SFP-FE-LX-SM1310-A
9/125 μm single mode
optical fiber
15 km (9.32 miles)
SFP-FE-LH40-SM1310
9/125 μm single mode
optical fiber
40 km (24.86 miles)