Connecting the switch to an ac power source – H3C Technologies H3C S5130 Series Switches User Manual
Page 22
15
support AC power input. The PSR150-D1 power module supports –48 V DC power input and RPS power
input.
Connecting the switch to an AC power source
The AC power connecting procedures are the same for fixed power modules and hot-swappable power
modules. This guide uses the PSR150-A1 power module as an example.
To connect the switch to an AC power source:
1.
Pull the bail latch leftward, as shown in
.
2.
Connect one end of the AC power cord to the AC-input power receptacle on the switch. See
callout 1 in
3.
Pull the bail latch rightward to secure the plug to the power receptacle. See callout 2 in
4.
Connect the other end of the power cord to the AC power outlet.
Figure 21 Connecting the AC power cord (1)
Figure 22 Connecting the AC power cord (2)