H3C Technologies H3C S5130 Series Switches User Manual
Page 56
49
Switch model
Port mode
LED (Mode)
status
LED Status Description
Flashing (not 3
Hz)
The port is sending or receiving
data at 10/100 Mbps.
Flashing yellow
(3 Hz)
POST has failed on the port.
Off
No link is present on the port, or
the port is not operating at
10/100 Mbps.
•
S5130-28S-PWR-EI
•
S5130-28S-HPWR-EI
•
S5130-28TP-PWR-EI
Steady
green (rate
mode)
Green LED
Steady on
The port is operating at 1000
Mbps, and a link is present on
the port.
Flashing
The port is sending or receiving
data at 1000 Mbps.
Off
No link is present on the port, or
the port is not operating at 1000
Mbps.
Yellow LED
Steady on
The port is operating at 10/100
Mbps, and a link is present on
the port.
Flashing (not 3
Hz)
The port is sending or receiving
data at 10/100 Mbps.
Flashing yellow
(3 Hz)
POST has failed on the port.
Off
No link is present on the port, or
the port is not operating at
10/100 Mbps.
Flashing
green (PoE
mode)
Green LED
Steady on
The port is supplying PoE
correctly.
Flashing (3 Hz)
•
The PD power requirement
exceeds the port PoE
capacity.
•
The port fails to meet the
power requirement of the PD
because of power
insufficiency of the switch.
Off
The port is not supplying PoE
power.
Yellow LED
Steady on
A non-PD device is attached to
the port, or the port is
experiencing a PoE failure.
Flashing (3 Hz) POST has failed on the port.
Off
The port is not supplying PoE
power.