H3C Technologies H3C SR8800 - Manual (Page 187)

171
Step Command Remarks
1. Enter system view. system-view N/A
2. Bind the IS-IS process with
MIBs.
isis mib-binding process-id
By default, MIBs are bound with
IS-IS process 1.
Configuring BFD for IS-IS
To enable BFD on an IS-IS interface:
Step Command Remarks
1. Enter system view. system-view N/A
2. Enter interface view. interface interface-type interface-number N/A
3. Enable IS-IS on the interface. isis enable [ process-id ] Disabled by default
4. Enable BFD on the IS-IS
interface.
isis bfd enable Not enabled by default
Displaying and maintaining IS-IS
Task Command Remarks
Display brief IS-IS configuration
information.
display isis brief [ process-id | vpn-instance
vpn-instance-name ] [ | { begin | exclude |
include } regular-expression ]
Available in any
view
Display the status of IS-IS debug
switches.
display isis debug-switches { process-id |
vpn-instance vpn-instance-name } [ | { begin |
exclude | include } regular-expression ]
Available in any
view
Display the IS-IS Graceful Restart
state.
display isis graceful-restart status [ level-1 |
level-2 ] [ process-id | vpn-instance
vpn-instance-name ] [ | { begin | exclude |
include } regular-expression ]
Available in any
view
Display information about IS-IS
enabled interfaces.
display isis interface [ statistics | [ interface-type
interface-number ] [ verbose ] ] [ process-id |
vpn-instance vpn-instance-name ] [ | { begin |
exclude | include } regular-expression ]
Available in any
view
Display IS-IS LSDB information.
display isis lsdb [ [ l1 | l2 | level-1 | level-2 ] |
[ lsp-id lspid | lsp-name lspname ] | local |
verbose ] * [ process-id | vpn-instance
vpn-instance-name ] [ | { begin | exclude |
include } regular-expression ]
Available in any
view
Display IS-IS mesh group
information.
display isis mesh-group [ process-id | vpn-instance
vpn-instance-name ] [ | { begin | exclude |
include } regular-expression ]
Available in any
view