H3C Technologies H3C SR8800 - Manual (Page 31)

25
Figure 18 Adding IP address group 2
f. Enter the name 192.168.1.2/32, select the protocol IPv4, enter the IPv4 address
192.168.1.2/32, and click <<Add to add the address to the IP address box.
a. Click Apply.
b. In the policy application range page, click .
Figure 19 Advanced configuration
Select 10 from the Segment list, select the Internal Zone option, select IP address 192.168.1.2/32
from the Internal Zone IP Addresses area, and click Apply.
a. After finishing the above configuration, click OK on the page shown in Figure 12 .
# Activate configurations:
After you finish the above configuration, the page jumps to the page as shown in
Figure 20 .