H3C Technologies H3C SR8800 - Manual (Page 32)

26
Figure 20 Activating configurations
a. Click Activate.
A confirm dialog box pops up.
b. Click OK to activate the configuration.
Verify the configuration:
Use the ping command to verify the connectivity between Host A and Host C, Host B and Host C.
The test results show that Host A can ping Host C but Host B cannot.
CAUTION:
Set the ACL rule length limit mode to 3 or 4 with the acl mode command before you creating an ACFP
policy rule of IPv6 protocol. For more information about ACL rule length limit mode, see
ACL and QoS
Command Reference.