Displaying and maintaining bfd – H3C Technologies H3C MSR 50 User Manual
Page 19
11
output the trap messages and the output destinations). For the information center configuration, see
Network Management and Monitoring Configuration Guide.
To enable BFD trap:
Step Command
Remarks
11.
Enter system view.
system-view
N/A
12.
Enable BFD trap.
snmp-agent trap enable bfd
Optional.
Enabled by default.
For more information about the
command, see the snmp-agent
trap enable command in Network
Management and Monitoring
Command Reference.
Displaying and maintaining BFD
Task Command
Remarks
Display information about
BFD-enabled interfaces.
display bfd interface [ verbose ] [ |
{ begin | exclude | include }
regular-expression ]
Available in any view.
Display information about enabled
BFD debugging.
display bfd debugging-switches [ |
{ begin | exclude | include }
regular-expression ]
Available in any view.
Display BFD session information.
display bfd session [ verbose ] [ |
{ begin | exclude | include }
regular-expression ]
Available in any view.
Clear BFD session statistics.
reset bfd session statistics
Available in user view.