H3C Technologies H3C WX3000E Series Wireless Switches User Manual

Page 76

Advertising

# Create AP template ap of model WA2100 and configure its serial ID as

210235A29G007C00001.

[AC]wlan ap ap model WA2100

[AC-wlan-ap-ap]serial-id 210235A29G007C00001

# Configure the type of radio 1 of the AP as 802.11g and map the service template to the current

radio.

[AC-wlan-ap-ap]radio 1 type dot11g

[AC-wlan-ap-ap-radio-1]service-template 1

[AC-wlan-ap-ap-radio-1]radio enable

[AC-wlan-ap-ap-radio-1]quit

[AC-wlan-ap-ap]quit

# Enable all radios.

[AC]wlan radio enable all

Configure the wireless client to join the IPv6 multicast group:
# Create VLAN 100 and enable MLD snooping in the VLAN.

[AC] mld-snooping

[AC-mld-snooping]quit

[AC]vlan 100

[AC-vlan100] mld-snooping enable

[AC-vlan100]quit

# Configure Ten-GigabitEthernet 2/0/1 as a hybrid interface, and assign it to VLAN 100.

[AC]interface Ten-GigabitEthernet2/0/1

[AC-Ten-GigabitEthernet2/0/1]port link-type hybrid

[AC-Ten-GigabitEthernet2/0/1]port hybrid vlan 100 tagged

[AC-Ten-GigabitEthernet2/0/1]quit

# Use the shortcut keys Ctrl + K to exit the AC configuration interface and return to the
configuration interface of the switch that is installed with the WX6000 access controller module.

Enable MLD snooping globally.

<Device> system-view

[Device] mld-snooping

# Create VLAN 100, and enable MLD snooping in the VLAN. Configure GigabitEthernet 0/0/2
as a trunk port, and assign it to the VLAN.

[Device] vlan 100

[Device-vlan100] mld-snooping enable

[Device-vlan100] quit

[Device] interface GigabitEthernet 0/0/2

[Device-GigabitEthernet0/0/2] port link-type trunk

[Device-GigabitEthernet0/0/2] port trunk permit vlan 100

[Device-GigabitEthernet0/0/2] quit

# Configure Ten-GigabitEthernet 0/0/1 of the switch as a hybrid interface, and assign it to VLAN
100.

[Device] interface Ten-GigabitEthernet 0/0/1

[Device-Ten-GigabitEthernet0/0/1] port link-type hybrid

[Device-Ten-GigabitEthernet0/0/1] port hybrid vlan 100 tagged

[Device-Ten-GigabitEthernet0/0/1] quit

# Configure the client to access the WLAN service and request multicast traffic destined for
FF1E::1.

Advertising

This manual is related to the following products:

H3C WX5500E Series Access Controllers, H3C WX3500E Series Access Controllers, H3C WX2500E Series Access Controllers, H3C WX6000 Series Access Controllers, H3C WX5000 Series Access Controllers, H3C LSWM1WCM10 Access Controller Module, H3C LSUM3WCMD0 Access Controller Module, H3C LSUM1WCME0 Access Controller Module, H3C LSWM1WCM20 Access Controller Module, H3C LSQM1WCMB0 Access Controller Module, H3C LSRM1WCM2A1 Access Controller Module, H3C LSBM1WCM2A0 Access Controller Module, H3C WA3600 Series Access Points, H3C WA2600 Series WLAN Access Points

Popular Brands

Popular manuals