H3C Technologies H3C WX3000E Series Wireless Switches User Manual
Page 91
82
[AC-mvlan-10] port WLAN-ESS 1
[AC-mvlan-10] quit
4.
Configure Switch:
# Enable IGMP snooping globally.
<Switch> system-view
[Switch] igmp-snooping
[Switch-igmp-snooping] quit
# Create VLAN 10, VLAN 2, and VLAN 3, and enable IGMP snooping in these VLANs.
[Switch] vlan 10
[Switch-vlan10] igmp-snooping enable
[Switch-vlan10] vlan 2
[Switch-vlan2] igmp-snooping enable
[Switch-vlan2] vlan 3
[Switch-vlan3] igmp-snooping enable
[Switch-vlan3] quit
# Configure Ethernet 1/1 and Ethernet 1/2 as trunk ports, and configure them to permit packets
from VLAN 2, VLAN 3, and VLAN 10 to pass.
[Switch] interface ethernet 1/1
[Switch-Ethernet1/1] port link-type trunk
[Switch-Ethernet1/1] port trunk permit vlan 2 3 10
[Switch-Ethernet1/1] quit
[Switch] interface ethernet 1/2
[Switch-Ethernet1/2] port link-type trunk
[Switch-Ethernet1/2] port trunk permit vlan 2 3 10
[Switch-Ethernet1/2] quit
5.
Verify the configuration:
# Display the multicast VLAN information on AC.
[AC] display multicast-vlan
Total 1 multicast-vlan(s)
Multicast vlan 10
port list:
WLAN-ESS 1
# Display the IGMP snooping multicast group information on AC.
[AC] display igmp-snooping group
Total 1 IP Group(s).
Total 1 IP Source(s).
Total 1 MAC Group(s).
Port flags: D-Dynamic port, S-Static port, A-Aggregation port, C-Copy port
Subvlan flags: R-Real VLAN, C-Copy VLAN
Vlan(id):10.
Total 1 IP Group(s).
Total 1 IP Source(s).
Total 1 MAC Group(s).
Router port(s):total 1 port.
GE1/0/1 (D)